Want to enhance the performance aspect of your device? Then, the readers will need to Root Samsung Galaxy M20, which will grant you ultimate resources that will render subtle support during the process.
Nowadays, Samsung phones may not sell like crazy, still, there are many people who use the budget for their mid-range phones from the same brand. However, there are several cases where the users want to upgrade the system.
But at the same time, you might don’t know about the precise method to access the root privileges. Hopefully, everything is covered in the upcoming tutorial, so buckle up and let’s start the instructions.
Root Samsung Galaxy M20 Using Magisk
The Galaxy M20 smartphone might not have the best specs. However, the device does have the charming effect of Samsung. Yet, if you are looking for a method to open the system settings doors, you will require a wide range of resources.
All of those necessary software, zip files, and tools are mentioned in the requirement section. So don’t waste your time and get those important resources with no delay.
Warning: Going all out with upcoming rooting process can cause KNOX security to trigger, which may not be good for the device’s health. But if you want to take the risk, follow the steps at your own will.
Requirements to Get Started!
- Before we start using the process, take a complete backup.
- You will require a computer and USB cable bundle to connect devices.
- Download and install the Samsung USB driver on the computer.
- Make sure the device’s bootloader is already unlocked.
- Get the necessary software from the following post.
Step 1: Unlock the bootloader
It’s possible to gain root attributes immediately if you unlock the bootloader settings of your smartphone first. It’s an important activity that everyone needs to perform if they want to push the limits of their device to a whole new level.
On the other hand, the process is very simple. Go to Settings, enable developer mode, enable USB debugging and OEM unlock. Afterward, turn off the phone and put it into the download mode. Click on the unlock bootloader settings. That’s it!
However, if you want to know about the whole process, you should consider reading the unlock bootloader for any Samsung phone to reduce the efforts to a certain expression. Afterward, you can move to the next task.
Step 2: Get the firmware file
The next big process for rooting your device will involve getting the correct firmware file, which means that you need to know about the model number and regional code. Once you have got both of those items, you can go to the Sam Mobile firmware.
Select the preferred model and enter the country code, and eventually click on the search button. Finally, download the Samsung Galaxy M20 stock ROM on the PC.
Step 3: Extract the AP file
I’m assuming that you already have the stock firmware zip file. If not, use the above mentioned resources to obtain the file without any further ado. Now, head toward the download folder. Following this, you will need extraction tools like 7-zip on the PC.
- Right-click on the Galaxy M20 firmware and select Extract here.
- After extracting, there will be four files appearing inside the folder.
- You have to right-click on the AP file and select Extract here.
- Now, you will get a boot.img.lz4 file inside the list.
- Right-click on the boot.img and select 7-zip >> Add to Archive
- Change the Archive format from .lz4 to .tar and press Ok.
- Finally, move this new boot.img.tar file to your smartphone.
Step 4: Create a patched file with Magisk
This rooting process even users to build magisk patched files, which will be used in the Odin tool. Here are the full instructions to start this method.
- Download and install the Magisk software on your phone.
- After completing the installation process, launch the app.
- Now, press the “Install Button” present in the Magisk section.
- Press on the “Select a Patched File” option from the menu.
- Navigate to the boot img file and easily select the file.
- A patching process will take place for a few minutes.
- Now, duplicate the magisk patched file to your PC.
Step 5: Access Developer Modes
- First of all, you have to open the Settings App.
- Now, scroll down to select About Phone >> Software information.
- Tap on the Build Number more than 9 times to activate developer options.
- Go to the additional settings and navigate to the developer’s settings.
- Inside this setting, allow USB debugging and OEM unlocking toggle.
Note: If the bootloader is unlocked, the OEM unlock toggle will be in grey color.
Step 6: Enable Download Mode
We have to put this device into download mode so that you can effortlessly utilize the flashing tool on the computer without any hassle.
- Long press the power button and select the Switch off option.
- Press and hold the Volume Up + Down key and connect to the Type C cable, while making sure the other end is properly connected to the computer.
- Release all of the buttons when the download logo appears.
- Navigate using the Volume keys and select download mode.
- Finally, the phone will boot into the device download state.
Step 7: Utilize the Odin Flash Tool
Before starting this process, make sure that you have already downloaded the Odin tool on your PC. Once the installation process is complete, launch the software.
- The software will automatically detect the Samsung phone.
- Now, go to the AP section and add the magisk patched file here.
- You have to add BL, CP, and CSC files from the firmware folder.
- Now, tap on the “Option” and disable the Auto-Reboot.
- Finally, press the “Start” button to begin the flashing process.
With this, the magisk patched will be integrated with the firmware, which means that you gain root access. Once the flashing process ends, reboot the device, and set up the magisk software once again to finally confirm the rooting privileges.
Through this post, I hope you root Samsung Galaxy M20 without any problem using the appropriate instructions from this guide. Now, there’s no problem having fun with the customization attributes of your phone. Meanwhile, if you have any doubts, do let us know in the comment section.